Product Details
Product parameters
| Model | A0P-D25 | AOP-D50 | A0P-D100 | AOP-D150 | A0P-D200 | AOP-D400 |
| Rated flow(L/min) | 25 | 50 | 100 | 150 | 200 | 400
|
| Rated pressure(MPa) | 0.6 |
| Initial pressure loss (Mpa) | ≤0.1 |
| Filtered water content | ≤100 |
| Coarse filtration( μ m) |
100 |
| Grade 1 filter rating( μ m) | 10、20 |
Grade 2 filter rating( μ m) | 3、5 |
| Pressure differentials | 0.2Mpa |
| Working temperature(°C) | 25- 80 |
| Recommended viscosity(cSt) | 10-120 |
| Voltage(V) | AC 380V(Three-phase)、50Hz |
| Motor power(kw) | 0.75 | 1.1 | 2.2 | 4 | 5.5 | 13
|
| Weight(kg) | 150 | 200 | 300 | 520 | 860 | 2860
|
| Dimensions(mm) | 1200x 800x1250 | 1350 x800x1400 | 1740x 980x1450 | 1800x1000x1540 | 1840x1050x1780 | 3180x 1600x2000 |
Note: *-is filter's rating,such as 03 is 3 microns.
**-is the suitable medium,Omission:General hydraulic oil;BH:Water - glycol , V:Phosphonate hydraulic fluid
***- the medium viscosity is too high or the oil temperature is low,need to add the heating device.
***-explosion-proof type: add F before type, Omission: normal type
Product features:
-The filtration speed is fast, once every 3-5 minutes, the oil filtration capacity is 30-40kg each time, and the oil residue is cleaned once every 1000kg filtration capacity of 60-70kg, which is easy to operate.
-Compared with other equipment, long-term use does not require any consumables, and there is no filter cloth cleaning and filter cloth cleaning consumption.
-Save electricity, start the power supply, cut off the power supply after adding the crude oil, use the centrifugal force generated by the drum to filter the oil, and the net oil will flow out after the drum is stationary.
-The use effect is better than all other filtering equipment, such as the trouble of replacing the filter cloth and the consumption of the filter cloth by the plate and frame oil filter, the danger of over-pressure detonation of air pressure filtration and the defect of low efficiency of repeated opening due to excessive sludge. Use this centrifugal filter The machine has no consumables to purchase, saves electricity and time, has good effect, high oil purity, clear color, and can be sold in cans or eaten directly.
-Although the equipment is small, it has high technology content. One is the problem of balance force when the drum rotates at high speed. There is a slight deviation of the ruler, even if it is only one millimeter. The drum rotating at high speed is like a vibrator. If it is too extreme, it will eventually make the liquid-solid resonance. Although the protection of the outer protective body will not cause danger, it will also cause a lot of damage to the internal organs. Many peers give up the terminal halfway. The scientific and technical personnel of our factory have been working on this research for several years, and repeated experiments to overcome various difficulties. The cylinder is molded and formed, and the inner and outer circles are finely ground to clear the vibration. The centrifugal force is balanced by the centripetal force of the axial movement, so that the high-speed rotation of the drum is balanced. The problem can be solved, so that the machine runs smoothly and has high safety performance. The precision sealing device is adopted to make the swivel and motor conjoined parts impermeable to oil and oil leakage.
The oil filter adopts a safety protection device, so that the swivel will not be separated from the motor when it rotates at a high speed.
The thoughtful and meticulous design makes the machine run smoothly, with high safety performance, and the filtering effect is better than other products of the same category.
Prodcut applications
1. Food and beverage industry; beer, wine. wine: sake, liquor, wine: fruit juice, bottled water, tea drinks, soy milk, syrup. dairy products, food addtives, water filtration to clarify the process and CIP.
2. Petrochemical industry: all kinds of lubricants and oil, glue, chemical fiber manufacturing process of various solution was filtered.
3. Qil and gas industry; amine desulfurization. dehydration flux filter, oil field water, completion fluid filtration.
4. Car paint. painting industry: paint, electrophoretic paint, pre-treatment fluid. paint and paint raw materials and solvent filtration.
5. Textile, printing and dyeing, paper making industry: spinning liquid. dyes, flux, water, additives, adhesives filter.
6. Edible oils and soap industry; coconut oil, polishing purification of edible oil, soap raw materials and water filtration.
7. Pharmaceutical industry: a variety of pharmaceutical intermediates, pharmaceutical raw materials, solvent filtration.
8. The electronic and electroplating industry: a variety of plating solution and water filtration.
9. Machining industry; a variety of cutting fluid, coolant and cleaning liquid filtration.
