Oil Purifiers
Model Number : Skid-Mounted
Filtration Grades : ≥3 grades (50μm, 5μm, 1μm)
Flow Rate : ≥ 6000 L/Hr
Vacuum Level : -0.06 ~ -0.095 MPa
Gas Content : ≤ 0.1%
The Skid Mounted Transformer Oil Purification Plant is an integrated insulating oil treatment system developed for on-site maintenance of power assets. All core assemblies — vacuum pumping unit, heating module, 3D flash evaporation separation tank, multi-stage precision filtration, oil transfer pump, intelligent measurement and safety interlock system — are pre-assembled on a heavy-duty steel skid frame.
Adopting high-vacuum flash evaporation technology, the equipment efficiently removes free water, dissolved moisture, air and dissolved fault gases from transformer insulating oil. Combined with gradient fine filtration, it captures sludge, carbon powder, metallic particles and solid contaminants, rapidly restoring dielectric strength and meeting DL/T and IEC standards for insulating oil.
Working Principle
Contaminated insulating oil is delivered by the oil pump to the heating system and heated to the optimal separation temperature. The heated oil enters the vacuum flash tank and forms thin oil film under high vacuum environment. Moisture and dissolved gases vaporize rapidly and are extracted out by the vacuum system.
The degassed oil flows through multi-stage fine filters to trap solid pollutants. Purified qualified oil is discharged for circulation or direct filling into transformers. The whole process runs in a closed loop to prevent secondary contamination.
Features
Integrated Skid Design for Fast Deployment
Modular layout on a steel skid with lifting lugs for easy transportation and hoisting. Ready for commissioning upon arrival. Optional weatherproof canopy for open-air operation; containerized version available on request.
High-Efficiency Purification with Stable Performance
Single-stage and double-stage high vacuum options available. The 3D thin-film flash structure maximizes oil-gas-water separation. Multi-stage progressive filtration delivers high dirt-holding capacity and fine accuracy, steadily optimizing moisture content, gas content, breakdown voltage and particle cleanliness.
Fully Automatic PLC & HMI Control
Equipped with touchscreen HMI for intuitive operation. Constant temperature heating, automatic level control, vacuum regulation and auto start-stop are supported. Real-time running data display and data logging are available for unattended cyclic oil purification.
Complete Interlock Safety Protection
Built-in protections against over-temperature, overload, abnormal pressure, vacuum failure, low oil level, foam overflow and dry heating. The system triggers alarm and automatic shutdown under abnormal conditions to avoid misoperation and protect both equipment and transformers.
Multi-purpose for Full Oil Service Workflow
Suitable for circulating purification, regeneration of used oil and treatment of new insulating oil. It can also perform transformer tank vacuum drying, vacuum pumping and vacuum oil filling, covering all oil handling procedures during transformer overhaul.
Customizable for Various Working Conditions
Multiple flow rates available to match HV, EHV and UHV transformers from 66kV up to 1000kV. Optional packages include explosion-proof electric system, online oil quality monitor, remote cloud monitoring and acid removal adsorption regeneration unit.
Parameter Table
| Item / Item | Parameter / Parameter |
|---|---|
| Operating Mode | High Line |
| Purification Process | High Vacuum Dehydration, Constant Temperature Heating, and Multi-stage Precision Filtration |
| Filtration Grades | ≥3 grades (50μm, 5μm, 1μm) |
| Application Range | Purification of ISO VG 68, ISO VG 46 Oils: Hydraulic Oil, Bearing Oil, Coolant |
| Purification / Filtration Capability | Free Water, Dissolved Water, Gases, Solid Contaminants, Metal Particles, Oil Sludge |
| Flow Rate | ≥ 6000 L/Hr |
| Vacuum Level | -0.06 ~ -0.095 MPa |
| Working Pressure | ≤ 0.4 MPa |
| Efficient Constant Temperature Heating | 55-65℃ |
| Power Supply | 380V, Three-phase, 50Hz |
| Operating Noise | ≤ 78 dB |
| Heating Power | As Required |
| Total Electrical Power | As Required |
| Dimensions | Approx. 1.7 × 1.6 × 1.7 m |
| Water Removal Accuracy | ≤ 50 PPM |
| Gas Content | ≤ 0.1% |
| Impurity Filtration Accuracy | ≤ 1-5 μm (No Free Carbon) |
| Continuous Operation Time | ≥ 200 Hours |
| Cleanliness | ≤ NAS 1638 Grade 5 |
| Emulsification Value | New Oil ≤15 min; Used Oil ≤30 min |
| Safety Features | Pressure Protection, Overload Protection, Alarm System, Automatic Shutdown |
| Control Panel — Panel Structure | Industrial Grade Steel, Weatherproof Control Panel, Mounted on Portable Oil Filter Unit |
| Control Panel — Protection Rating | Minimum IP54 |
| Control Panel — Buttons | Lockable Enclosure, Key Provided by Owner |
| Starting Method | Physical Start/Stop Button |
| Indicator Lights | Standard |
| Note | No PLC or HMI Required |
Applications
Widely used in grid substations, thermal & hydropower plants, renewable energy booster stations, railway power supply stations, industrial self-owned power plants and power engineering contractors.
Suitable for installation, major repair, preventive test and daily oil regeneration of power transformers, reactors, CT, PT, oil-filled bushings, oil circuit breakers and oil-filled capacitors.
· Professional manufacturer with many years' experience
· Good quality with competitive price
· OEM & ODM are welcome
· Various payment items are acceptable
· Good service by experienced manager