Air compressor because in the process of work, by the compressor pressurized air stored into the tank use. Due to the high pressure, it generates more heat energy, and if it cannot be cooled down in time there is a possibility of overheating resulting in risk. The air compressor cooler is a machine used to cool down the air compressor, which can better maintain the continuous work of the air compressor. The air compressor cooler should also be cleaned in time after a long period of use to prevent its own scale, so that the air compressor inlet and exhaust temperatures rise to affect the cooling effect.
Notes on the use of air compressor coolers
1. Factors affecting the efficiency of air-cooled cooler：
（1） too much dust between the fins in the condenser;
（2） the condenser cooling aluminum fins and copper tubes between the aging loose, heat transfer efficiency decreased;
（3） condenser cooling fan air volume is not enough.
2. Factors affecting the efficiency of water cooler:
（1） the cooling water is not enough, the heat of the air is not enough to be taken away by the cooling water, resulting in the next level of suction temperature increases, the gas density decreases, resulting in a reduction in exhaust volume. The process usually requires the cooling water pressure to be greater than 0.15MPa (gauge pressure).
（2） cooling water temperature phthalate high: high water temperature so that the temperature difference between water and gas is reduced, the heat transfer cooling effect is reduced;
（3） cooling water pipe scale or by the sediment, organic matter blockage, as well as the cooler gas side after cooling water analysis out, failed to timely discharge, which will affect the heat transfer area or heat transfer conditions, affecting the cooling effect. The cooling effect is not good, so that the temperature into the next level rises, affecting the performance curve of the next level, so that its export pressure and flow rate are reduced.
Maintenance steps of air compressor cooler
After a long time use of air compressor cooler, the air compressor cooler forms a large amount of dust and dirt, which makes the air compressor inlet and exhaust temperature rise and the air cannot be cooled to the intended temperature, so it is very important to clean up the air compressor cooler.
1. Air-cooled air compressor cooler cleaning and cleaning steps
Stop the air compressor equipment and confirm that the pressure has been released, pull down the main power switch. Open the air guide cover to clean the cover or remove the cooling fan. Use compressed air to blow down the dirt and then take the dirt out of the air guide cover; if it is dirty, you should spray some degreasing agent and blow again. When it is not possible to clean the air compressor cooler by the above methods, it is necessary to remove it, soak it with cleaning liquid or spray it and clean it with the help of brush. Install the cover or cooling fan.
2. Cleaning steps for water-cooled air compressor coolers
Stop the machine and make sure the pressure has been released, pull off the main power switch. Disconnect the cooling water inlet and outlet pipes. Fill with cleaning solution and soak or flush with pump cycle. Flush with clean water. Install the cooling water inlet and outlet pipes. When the oil cooler scale is more serious, when the above methods are not ideal for cleaning, you can remove the oil cooler alone, open the two end caps, use special cleaning steel brush or other tools to remove the scale, available chemical method to remove the scale.
Our advantages
1.Professionalism-many years of experience and technology, covering a wide range
2. Good quality - good production environment, strict product quality inspection
3. Attentive service-enthusiastic service, quick response to every customer's question
4. Price advantage - have a very competitive price
Customer Cases
Peruvian customer asked us for air compressor cooler with piece number, after the salesman's patient explanation, Peruvian customer ordered 2 sets of air compressor coolers, and the feedback was very good after receiving the goods.