Replacement filter element is suitable for Plate and frame filter  Air filter element of centrifugal air compressor CJV415372

Product Details

Monitor the status of the air filter element, and replace the filter element when the indicator pointer points to the red area (20-30 "water column, 51-76cm);

when the air filter maintenance table points to the red area when the unit is in full load operation or half a year later, the air filter element shall be replaced;

After 1000 hours of operation, replace the air filter element as required;

When the vacuum switch of inlet filter element monitors the intake air filter, if the pressure difference is too large, it will alarm automatically; the filter and other components are monitored by corresponding instruments. If there is a problem, the monitoring instrument will send out alarm signal and replace the filter element.

Product features

1. Fully enclosed structure is adopted to prevent dust from entering;

2. Surplus flow design: under the rated flow, the ultra-high efficiency air inlet filtration has 99.9% filtration accuracy (higher than is05011), and the filtration accuracy is close to 2ppm. The high-precision air filter can prolong the service life of various precision components;

3. The air inlet pressure loss is less than or equal to 2500pa, which greatly reduces the air loss and improves the unit efficiency;

4. Heavy duty design, 5 times higher ash capacity than the traditional air filter, prolonging the service life of the machine, longer maintenance cycle and lower maintenance cost;

5.High precision air filter design with pre separation structure. Filter element with large ash content and low initial pressure drop. At the same time, it can effectively ensure the stable operation of the unit in harsh environment.

Product parameters

Product application

1.Desalting of Well Waters

2.Municipal Drinking Water

3.Power Generation Industry

4.Electronics and Semiconductor Industry