Product Details
Water is vital part of daily life though it does not provide any calories. Water is very essential for all living beings in the Earth. It covers nearly 70% of earth’s surface. Even though the major portion of earth is covered by water, there is severe shortage of drinking water in most of the countries across the world. In these days advanced desalination technologies are applied to the water, including seawater and brackish water, to keep it pure and safe for use. Several industries required pure water to constantly run, as it helps them do their work effectively. It also provides clean safe water for everyone while preventing damage to their equipment due to deposits from hard and saline water.
Hydranautics brackish water CPA3-8040 RO membrane has used most advanced technologies. It has a 99.7% rejection rate, as it filters out impurities from water, thereby yielding an effective result. This is the standard recommendation for every industry that cares for highly purified water.
Hydranautics brackish water CPA3-8040 RO membranes are regarded as the industry standard for all critical high purity applications. It has 8 inches dia. with 99.7% rejection was an upgrade to the CPA3 reverse osmosis membrane as it is designed with Low Differential Pressure LDTM. Hydranautics CPA3 membranes set the standard for high performance RO membrane elements.
CPA3 is the third generation of CPA high rejection Brackish water RO membranes from Hydranautics. This membrane at 99.7% rejection is an upgrade to the CPA2 with 10% more membrane area (400 square feet). This resulted in reduced capital costs by requiring fewer pressure vessels and less floor space. Hydranautics CPA3 8040 membranes also have a thicker (31 mil) feed spacer that exhibits higher tolerance to feed water suspended solids.
Product features
1.With the rejection rate of 99.7% and a permeate flow of 11,000 GPD, the Hydranautics CPA3-8040 Brackish Water RO Membrane delivers unmatched performance.
2.It is highly efficient and cost-effective, which makes it the best among other filtration membranes.
3.Hydranautics CPA3-8040 has a Spiral Wound configuration and a Composite Polyamide with a 1500 ppm NaCl solution. It records up to 15% of permeate recovery within 6.5 – 7.0 pH range and a temperature of 25 °C.
Product parameters
Model: | CPA3 8040 |
Place of Origin: | Henan, China |
Brand Name: | LVDA |
Life span: | 2000- 4000h |
Certificate: | ISO9001:2015 |
Quality: | 100% Tested |
Product name: | RO membrane |
Application: | RO plant |
Type: | RO spare parts |
Capacity: | 0.3-200000T/H |
Size: | 8″ diameter x 40″ length |
Permeate Flow: | 11,000 gpd (41.6 m3 /d) |
Salt Rejection: | 99.7% (99.6% minimum) |
Configuration: | Spiral Wound |
Membrane Active Area: | 400 ft2 (37.1 m2) |
Feed Spacer: | 31 mil (0.787mm) |
Maximum Applied Pressure: | 600 psig (4.14 MPa) |
Maximum Feed Flow: | 75 GPM (17.0 m3/h) |
Product application
1.Desalting of Well Waters
2.Municipal Drinking Water
3.Power Generation Industry
4.Electronics and Semiconductor Industry
