DONALDSON is the world leader in engine filtration system and gas emission control system solutions.
Donaldson has established close cooperation with Ford, CATERPILLAR, CUMMINS, FREGHTLINER, JOHN DEERER, Volvo, ISUZU, MITSUBISHI and other companies.
Donaldson's filter equipment and various filters (air filter, oil filter, diesel filter, hydraulic oil filter, water filter, etc.) can meet the needs of users of many global brands of engineering machinery, marine power equipment, transportation equipment, oil field and mining equipment.
According to the filtering principle, air filters can be divided into filtering type, centrifugal type, oil bath type and composite type. The air filters commonly used in engines mainly include inertia oil bath air filter, paper dry air filter, polyurethane filter element air filter, etc. Inertia oil bath air filter successively passes through three stages of inertial filtration, oil bath filtration and filter filtration, and the last two air filters are mainly filtered by filter element. Inertial oil bath air filter has the advantages of small air inlet resistance, being able to adapt to dusty and sandy working environment, and long service life. It was previously used on many types of automobile and tractor engines. However, this kind of air filter has low filtering efficiency, large weight, high cost and inconvenient maintenance, and has been gradually eliminated in automobile engines. The filter element of paper dry air filter is made of resin treated microporous filter paper. The filter paper is porous, loose, folded, has certain mechanical strength and water resistance, and has the advantages of high filtering efficiency, simple structure, light weight, low cost, convenient maintenance, etc. It is a widely used automotive air filter.
In order to keep the hydraulic system clean and drive away particles and debris that may cause wear or failure of parts, Donaldson has designed a series of hydraulic oil filters for various mobile hydraulic systems. Donaldson has a large range of hydraulic oil and transmission gear oil filters and hydraulic system accessories. According to the technical reserve procedure for product development of Donaldson Company, users can select various filter elements and different filter bases to design a filtering system suitable for users.
*High Pressure Filter
Protect various expensive hydraulic components from the wear of foreign particles and sand particles.
*Medium Pressure Return Line
It is installed on the oil return pipeline to filter out the pollution and impurities generated during the operation of the equipment.
*Suction Filter
Protect the hydraulic pump and filter out impurities and particles.
*Hydraulic oil strainer
Before the hydraulic oil enters the hydraulic system, filter out the impurities with large size.
Product features
1. Longer service life: Regular use of LVDA spare parts to maintain your equipment can ensure that your device has a longer service life. We guarantee that each new component has the same good performance as the replaced component.
2. High quality: our original parts are manufactured according to the same strict standards as the compressor you have installed. These parts have passed the durability test and proved to be a better guarantee for your investment.
3. Reliability and productivity: The use of original parts can fundamentally reduce the risk of production stoppage, because production stoppage is not only costly, but also may affect product quality, delivery time and profit margin. In short, original parts enable your compressed air unit to perform better.
4. Energy saving and cost-effectiveness: regular replacement and use of LVDA parts will enable your compressed air device to have a longer service life and achieve a smaller average pressure drop, so as to achieve energy conservation, achieve cost-effectiveness and provide a larger exhaust volume at a lower cost of ownership.
Product parameters
Outer Diameter | 3.18 inch (80.8 mm) |
Thread Size | 3/4-16 UN |
Length | 3.39 inch (86 mm) |
Gasket OD | 2.52 inch (64 mm) |
Gasket ID | 2.13 inch (54 mm) |
Efficiency 99% | 25 micron |
Efficiency Test Std | SAE J1985 |
Collapse Burst | 75 psi (5.2 bar) |
Style | Spin-On |
Media Type | Cellulose |
Primary Application | TOYOTA 2330356301 |
Packaged Length | 3.15 IN |
Packaged Width | 3.15 IN |
Packaged Height | 3.65 IN |
Packaged Weight | 0.76 LB |
Packaged Volume | 0.02093349825 FT3 |
Product application
1.Power plant
2.Steel mill
3.Subway engineering
4.Chemical factory
5.Ship
6.Paper mill
· Professional manufacturer with many years' experience
· Good quality with competitive price
· OEM & ODM are welcome
· Various payment items are acceptable
· Good service by experienced manager