Replacement P551315 FUEL FILTER, SPIN-ON

Product Details

In order for the mixture of fuel and air to explode well in the engine, there must be no impurities mixed in the fuel. Therefore, impurities contained in fuel must be removed, and this role is the fuel filter. However, one of the parts that is difficult for drivers to find in the engine room is also a fuel filter. In particular, depending on the type of vehicle, the fuel filter can be seen only by lifting the car with a lift, and most gasoline vehicles released these days have fuel filters inserted into the fuel tank, making it difficult for drivers to check. In the book, let's look at diesel (common rail) fuel filters as a standard.

In most diesel cars, fuel filters are installed in the engine room, and the replacement cycle is shorter than gasoline due to the ultra-high pressure injection method, but the quality of oil fuel has improved recently, and the life of fuel filters is also increasing. In addition, the fuel filter of the diesel vehicle is equipped with a heater device to prevent fuel from freezing even in winter, and a moisture sensor is integrally mounted.

When replacing the fuel filter, the driver must decide whether to replace it with an assembly or only the filter element. The cost varies by three times depending on this selection, and it is generally recommended that the assembly be replaced once for two replacements of the element. The average replacement time for fuel filters is 60,000 km for gasoline and 30,000 km for diesel, and it is preferable to refer them to the repair shop because it is difficult for the driver to replace them himself. Even when requesting a repair shop, if only the filter element is replaced, the difficulty of the work is high, so you will pay more for the technology, but the overall cost can be saved.

Product features

1. It mainly filters out the solid impurities (iron oxide, dust, etc.) contained in the fuel, so as to protect the oil pump nozzle, cylinder liner and piston ring.

2. It can greatly reduce the wear of the oil pump and avoid the blockage.

Product parameters

Product application

1.Automotive

2.Electronics

3.Food & Beverages

4.Chemical

5.Petrochemical

6.Plastics

7.Paint

8.General Industrial application